|
|
  
 
Subject: early C3: have entire dash/heater box out - what else to do while in there?
From: pgtr <pgtr(deletethisnsubsatsymbol>bigfoot[ddot]com>
Subject: early C3: have entire dash/heater box out - what else to do while in there?
Date: Fri, 08 Oct 2004 00:05:55 -0500
Lines: 29
NNTP-Posting-Host: 3b315500.news.twtelecom.net
________________________________________________
`71 - what else should I look at, check or do while I have the dash
completely gutted?
Pulled dash/console to replace stereo, speakers, ammeter, tach-needle.
and tach/speedo cables. Then I remembered the heater was bypassed
years ago by a previous owner - so took out the heater box under
assumption it was ancient and likely leaked. (not as easy w/ an AC car
and now I see why).
So what else...?
Is it worth having the tach/speedo re-calibrated? AFAIK they were
accurate years ago but both cables gave and one needle and it`s been
stored for quite a while - they are out now and there is a guy locally
that calibrates the magnets. Worth it or leave well enough alone?
It`s an air car - should I get into replacing all the `seals` on the
Rube Goldberg AC flap design system.
What about those speaker `baffles` sold by Crutchfield etc - do they
help clean up bass response on speakers mounted in dash?
Any other GM cars (e.g. a junkyard) have same radio knobs as `69-71
Corvettes? I lost ONE(1) of my orig Tone/Balance inner knobs dangit!
And right now I`m too cheap/poor to spend $20 some bucks on a full set
of knobs to replace a single one.
From: DaveinIllinois(at)webtv.net
Subject: Re: early C3: have entire dash/heater box out - what else to do
whi...
Date: Fri, 8 Oct 2004 07:06:54 -0500
Lines: 4
NNTP-Posting-Host: localhost.webtv.net
________________________________________________
Id replace all of the instrumentation bulbs with new ones , and, replace
the oil pressure line for the oil pressure guage. ANd insulate the
firewall best you can.
From: =?iso-8859-1?Q?Dr.Ha=A30nfire$?= <sharron_field(at)hotmail.spammersfuckoff.com>
Subject: Re: early C3: have entire dash/heater box out - what else to dowhi...
Date: Fri, 8 Oct 2004 19:08:22 +0100
Lines: 18
________________________________________________
DaveinIllinois(at)webtv.net wrote:
>> Id replace all of the instrumentation bulbs with new ones , and,
>> replace the oil pressure line for the oil pressure guage. ANd
>> insulate the firewall best you can.
I`d shut the fuck up and get myself an education before I started trying to
educate others if I were you.
Incidentally you never did explain your theory on the sun having a nitrogen/
helium fusion reaction.
--
My IMPROVED website now on my server (at) http://5110.sytes.net
Do not miss this amazing UK Online Store (at) http://tinyurl.com/3bywg
The CHEAPEST utility services in the UK :- http://tinyurl.com/3ff7m
Back in Operation : The Blog With Teeth. :
http://thebrainspot.blogspot.com
NEXT POSTS: br> br> br>
| | |