|
|
  
 
Subject:
Re: Eckler`s SMC panels for C3
From: "YT" <nospam(at)hotmail.com>
Subject: Re: Eckler`s SMC panels for C3
Date: Sun, 19 Oct 2003 00:05:49 +0200
Lines: 20
NNTP-Posting-Host: ppp-62-235-189-105.tiscali.be
________________________________________________
So, this means that they have a lott of bad parts in stock that they sell
first ??
Yves
just little old me <vette760xxx(at)lycos.com> schreef in berichtnieuws
3F913CC6.2D37BD68(at)lycos.com...
> no to bad if you can go pick it out..........
>
> YT wrote:
>
> > How is the quality of Eckler`s SMC bodypanels compared to factory panels
?
> >
> > Thanks
> >
> > Yves
>
From: just little old me <vette760xxx(at)lycos.com>
Subject: Re: Eckler`s SMC panels for C3
Lines: 23
Date: Sun, 19 Oct 2003 12:47:51 GMT
NNTP-Posting-Host: 24.26.62.9
________________________________________________
alot of so so part and good ones
YT wrote:
> So, this means that they have a lott of bad parts in stock that they sell
> first ??
>
> Yves
>
> just little old me <vette760xxx(at)lycos.com> schreef in berichtnieuws
> 3F913CC6.2D37BD68(at)lycos.com...
> > no to bad if you can go pick it out..........
> >
> > YT wrote:
> >
> > > How is the quality of Eckler`s SMC bodypanels compared to factory panels
> ?
> > >
> > > Thanks
> > >
> > > Yves
> >
From: meguilagorilla(at)bellsouth.net
Subject: ECM Computer wiring
Date: 19 Feb 2007 05:25:35 -0800
Lines: 14
NNTP-Posting-Host: 74.229.193.189
________________________________________________
I am currently working on a `94 Corvette. Not sure what model, but i
have been trying to do the diagnostic`s on it and my MT2500 scanner is
telling me that it cant communicate with the computer. I have been
told that none of the ealershiops have the paper copies anymore of the
wiring. Its all on computer now and they wont take the effort to look
it up for me. I have been told that the fuses and possibly the fusable
link off of the starter maybe the reason. Does anyone have the service
manuals for this car that shows the wiring breakdown for the main
computer so that i can check for power on the appropriate wires? Any
assistance would be greatly appreciated.
Brian
Titusville FL
NEXT POSTS:
| | |
