|
|
  
 
Subject:
Re: Eckler`s SMC panels for C3
From: just little old me <vette760xxx(at)lycos.com>
Subject: Re: Eckler`s SMC panels for C3
Lines: 23
Date: Sun, 19 Oct 2003 12:47:51 GMT
NNTP-Posting-Host: 24.26.62.9
________________________________________________
alot of so so part and good ones
YT wrote:
> So, this means that they have a lott of bad parts in stock that they sell
> first ??
>
> Yves
>
> just little old me <vette760xxx(at)lycos.com> schreef in berichtnieuws
> 3F913CC6.2D37BD68(at)lycos.com...
> > no to bad if you can go pick it out..........
> >
> > YT wrote:
> >
> > > How is the quality of Eckler`s SMC bodypanels compared to factory panels
> ?
> > >
> > > Thanks
> > >
> > > Yves
> >
From: meguilagorilla(at)bellsouth.net
Subject: ECM Computer wiring
Date: 19 Feb 2007 05:25:35 -0800
Lines: 14
NNTP-Posting-Host: 74.229.193.189
________________________________________________
I am currently working on a `94 Corvette. Not sure what model, but i
have been trying to do the diagnostic`s on it and my MT2500 scanner is
telling me that it cant communicate with the computer. I have been
told that none of the ealershiops have the paper copies anymore of the
wiring. Its all on computer now and they wont take the effort to look
it up for me. I have been told that the fuses and possibly the fusable
link off of the starter maybe the reason. Does anyone have the service
manuals for this car that shows the wiring breakdown for the main
computer so that i can check for power on the appropriate wires? Any
assistance would be greatly appreciated.
Brian
Titusville FL
Date: Mon, 19 Feb 2007 06:33:07 -0800
From: Crabs <IHateSpam(at)SpamSucks.com>
Subject: Re: ECM Computer wiring
Lines: 33
NNTP-Posting-Host: 24.2.59.142
________________________________________________
meguilagorilla(at)bellsouth.net wrote:
> I am currently working on a `94 Corvette. Not sure what model, but i
> have been trying to do the diagnostic`s on it and my MT2500 scanner is
> telling me that it cant communicate with the computer. I have been
> told that none of the ealershiops have the paper copies anymore of the
> wiring. Its all on computer now and they wont take the effort to look
> it up for me. I have been told that the fuses and possibly the fusable
> link off of the starter maybe the reason. Does anyone have the service
> manuals for this car that shows the wiring breakdown for the main
> computer so that i can check for power on the appropriate wires? Any
> assistance would be greatly appreciated.
>
> Brian
> Titusville FL
>
What you need is the Helms manual and sadly it`s currently out of stock:
http://tinyurl.com/27tl58
Join the Corvette Forum and ask over there.
http://forums.corvetteforum.com/forumdisplay.php?f=19
Someone will have it and either let you borrow or buy it.
There`s no reason that the local stealership won`t have shop manuals for
your car. They just don`t want you using theirs.
The reason your scanner won`t work is because you`re `Vette was made in
between the transition between an ODBI car and an ODBII. You`ll need an
OBDI scanner with an OBDII ALDL connection.
What is wrong with the car?
TomC
`90ZR1 #792
NEXT POSTS:
| | |
